I am seriously thinking about moving all my savings (which do not generate attractive interest and are devalued) to Bitcoin
Bitcoin no, but people Yes, what will happen when Bitcoin becomes so coveted that people and certain businesses start scamming their customers? If Bitcoin is not legal then there would be no legal repercussions from a lawsuit, if it becomes legal, the ethos of separating state and government from currency would be meaningless, humanity will be put to the test. 🤔
Could you take a photo of the coldcard Q to see the colors?
Add me as a peer to the Lightning node
https://amboss.space/es/node/0268095e71f2a77e9a21addc3a22d4c90e5318ac0eab0049b9060d24aea472b5b2
**Best Privacy Practices for Withdrawals from an Exchange**
Exchanges where you buy Bitcoin hold your information, which they may share with third parties. These third parties can use technology to track all your transactions, as Bitcoin addresses can be verified on the blockchain. This includes both addresses you receive from and send to, creating a profile of usage and addresses related to that profile. Exchanges can refuse your sats transfers for any reason, and if they believe you are making too many transactions, they may consider you a risky individual.
For better anonymity and to make it more difficult for both the exchange and the third-party company to which they send your information, advanced Bitcoin users recommend:
**Using Small Amounts via Lightning to Transfer to Onchain (see atomic swaps below), less than $300.**
**Running Your Own Node:**
With your own node, you can receive small transactions that are difficult to trace. Invoices created can be decoded but will only show information like the amount and the invoice’s timestamp. They will not reveal other important information since it is encrypted. Additionally, sats jump from node to node until they reach their final destination (your node). Most nodes are on an Onion network, which provides greater anonymity.
**Example of Invoice:**
Lnbc2m1pnrjd6epp5xg37tadmcc479dt8c3rqk9mu4p08y8a5uvdd4repy4r8zzs40y4qdqqcqzzsxqrrs0fppqhsrcf2xszcp9nu4xgxzjwx6m3qnvlvrtsp5nft6epu8wxaxytyadq95ygyqvewuhuqh4zw6wevwvufxjr0zc0qq9qyyssqtafnv4cz4uuccg8xfw0ec2lgmr9u23rg85ac86zdnkn4mkq93krn283prlthqky5ujpv8x4cecs4634uu4gcw4f57l3haur8vg6myggp7z6erh
[Decode Invoice](https://lndecode.com/)
**Using Atomic Swaps:**
If you want to transfer your sats from the exchange to your BTC address, which could be another wallet of our custodian (with our seed phrase, 12 or 24 words) as a Coldwallet, and you don’t want the exchange to have your final receiving address (since they can create profiles and sending addresses that can be tracked on the blockchain), you can use atomic swaps. You send sats via Lightning and receive sats via Onchain, though there is a fee for the swaps.
**Recognized and Trusted Websites for These Transactions:**
- [Boltz Exchange](https://boltz.exchange/)
- [Robosats](https://learn.robosats.com/)
For example, see Boltz Exchange:
)
)
Buenas prácticas de privacidad en envíos desde una exchange
Las exchange donde compras Bitcoin poseen tu información las cuales usan para dárselas a un tercero, este tercero pueden ser compañías usando tecnología para rastrear todas tus transacciones ya que las direcciones Bitcoin pueden ser verificadas en la blockchain, las que recibes y las que envías de manera que se crea un perfil de uso y direcciones relacionadas a ese perfil, se sabe que las exchange pueden denegarte tus envíos de sats por cualquier motivo y si creen que estas teniendo demasiado movimiento en tu cuenta pensaran que sos un individuo riesgoso
Para tener un mejor anonimato y que se les dificulte tanto a la exchange como a la empresa tercera a la que le envían tu información ls Bitcoiners avanzados recomiendan:
Utilizar montos pequeños via Lightning para luego pasarlos a Onchain (ver atomic swaps abajo), menores a 300 dólares.
Tener tu propio nodo
Teniendo tu propio nodo podes recibir transacciones pequeñas que son difíciles de rastrear, las invoices creadas se pueden decodificar pero solo mostraran información como el monto el monto y el time stamp del invoice, No mostraran otra información importante dado a que esta encriptado, ademas los sats brincan de nodo en nodo hasta llegar a su destino final (tu nodo); La mayoría de nodos están en una red Onion por lo que da un mayor anonimato.
Ejemplo de Invoice
Lnbc2m1pnrjd6epp5xg37tadmcc479dt8c3rqk9mu4p08y8a5uvdd4repy4r8zzs40y4qdqqcqzzsxqrrs0fppqhsrcf2xszcp9nu4xgxzjwx6m3qnvlvrtsp5nft6epu8wxaxytyadq95ygyqvewuhuqh4zw6wevwvufxjr0zc0qq9qyyssqtafnv4cz4uuccg8xfw0ec2lgmr9u23rg85ac86zdnkn4mkq93krn283prlthqky5ujpv8x4cecs4634uu4gcw4f57l3haur8vg6myggp7z6erh
Utilizar Atomic Swaps
Queremos enviarnos (sacar) nuestros sats de la exchange que estamos utilizando hacia nuestra dirección BTC esta puede ser otra billetera de nuestro custodio (tenemos nuestra frase semilla, 112 o 24 palabras ) como Coldwallet y no queremos que la exchange tenga nuestra dirección final de recepción, ya que pueden crear perfiles y direcciones de envío que se pueden rastrear en la cadena de bloques.
Puedes usar atomic swaps, envías sats via lightning y recibes sats via onchain, claro hay un porcentaje que se paga por hacer los swaps.
Paginas reconocidas y confiables en donde puedes hacer estas transacciones
Tomare de ejemplo boltz.echange
Using wormhole to encrypt and send files. The file is deleted within 24 hours or after 100 downloads.
I leave you the link to this book about bitcoin that I thought was great.
https://wormhole.app/nne1N#fMRXmITJmscfXHTtgMq5Lg
#bitcoin #wormhole 
Using wormhole to encrypt and send files. The file is deleted within 24 hours or after 100 downloads.
I leave you the link to this book about bitcoin that I thought was great.
I bought a bitaxe to learn about mining, at first I connected it with public-Pool, obviously I don't expect to earn Bitcoin by mining with a bitaxe.
I found out that Braiins Pool now has Lightning payments so I decided to create a Braiins account and connect my bitaxe.
Guess who is earning 30 sats a day 🙃😎
#bitcoin #mining #braiins #lightning #sats
How to import your Lightning account from bluewallet to Zeus
Bluewallet no longer has the Tor function, therefore it can no longer connect to our node through this means.
Our existing accounts will not be able to sync and we will not be able to use our sats.
Zeus has the Tor function and we can import the existing account by connecting it to our node and you can continue using it.
Procedure
In the Zeus app in settings press the "+" sign select LNDhub, select Tor and select existing account, (we are going to import the existing Bluewallet wallet) with this we will import all the existing funds that we had.
-In bluewallet copy the account address
In the account press "..."> export/backup
The address will look like this.
E.g.
lndhub://123abc:456defg@http://toraddress.onion
lndhub://user:password@http://toraddress.onion
see image, (1) in username put the numbers and letters before ":"
(2) The password is the numbers and letters after ":" and before @
(3) host is the tor address after @ 
#bitcoin #lightning #zeus #bluewallet #tor
How to import your Lightning account from bluewallet to Zeus
Bluewallet no longer has the Tor function, therefore it can no longer connect to our node through this means.
Our existing accounts will not be able to sync and we will not be able to use our sats.
Zeus has the Tor function and we can import the existing account by connecting it to our node and you can continue using it.
Procedure
In the Zeus app in settings press the "+" sign select LNDhub, select Tor and select existing account, (we are going to import the existing Bluewallet wallet) with this we will import all the existing funds that we had.
-In bluewallet copy the account address
In the account press "..."> export/backup
The address will look like this.
E.g.
lndhub://123abc:456defg@http://toraddress.onion
lndhub://user:password@http://toraddress.onion
see image, (1) in username put the numbers and letters before ":"
(2) The password is the numbers and letters after ":" and before @
(3) host is the tor address after @
Como importar tu cuenta Lightning de bluewallet a Zeus
Bluewallet ya no posee la función Tor por lo tanto ya no se puede conectar a nuestro nodo por este medio.
Nuestras cuentas ya existentes no podrán sincronizarse y no podremos usar nuestros sats.
Zeus posee la función Tor y podemos importar la cuenta existente conectándonosla a muestro nodo y podes seguir usando.
Procedimiento
En la aplicación Zeus en configuración presione el signo "+" seleccione LNDhub, seleccione Tor y seleccione cuenta existente, (vamos a importar la billetera Bluewallet existente) con esto importaremos todos los fondos existentes que teníamos.
-En bluewallet copie la dirección de la cuenta
En la cuenta presionar "..."> exportar/copia de seguridad
La dirección se verá así.
E.g.
lndhub://123abc:456defg@http://toraddress.onion
lndhub://usuario:contraseña@http://toraddress.onion
ver imagen, (1) en nombre de usuario coloque los números y letras antes de ":"
(2) la contraseña son los números y letras después de ":" y antes de @
(3) host es la dirección tor después de @ 
How to create a Lightning account connected to your node using Bluewallet and Tailscale.
Pre requirements
-bluewallet
-tailscale
-static address for the node
Procedure.
1) install the Bluewallet app on your node and your smart device.
2) install Tailscale on your node, it will ask you to create an account using email.
Install the application on your smart device and use the same email that you used on your node.
3) on your smart device open the Tailscale application and log in, you will see two devices connected with their own IP (your node and your cell phone, in my case), press the name of your node and your addresses will appear, IPV4, magicdns, IPV6, in addition to the expiration of your access key.
Test
We are going to copy and paste the IPV4 address into your browser, the log in of your node should appear, in my case it is umbrel.
With this we know that there is a connection with our node.
Connect tailscale to bluewallet
-on our device we open the Bluewallet application and select the 3 dots “…” in the upper right corner (settings) > Network> Lightning settings > paste the IPV4 address and add at the end: 3008 is the port that Bluewallet uses on our node.
You can also use magicdns and add the port :30008 at the end.
e.g.
Create accounts
We can now create accounts connected to our node using tailscale.
In bluewallet >press the “+” sign> lightning>create
A QR image will appear with an address at the bottom, we will use it later to create the same account but with a local network.
E.g.
lndhub://user:password@http://host:port
lndhub://numbers and letters:number and letters@http://IPV4:3008
Create the same account but on a local network
Once the account with tailscale connection is created, we can recreate the same account.
In our new Lightning account we press “…”> export/backup> copy the account
We import the existing account but we will change the host to the local umbrel host, for that we go to the “+” sign in bluewallet > lightning > import Wallet > we paste the backup of the tailscale account and modify the end with our local umbrel ip .
E.g.
lndhub://user:password@http://host:port
lndhub://numbers and letters:number and letters@http://umbrel.local:3008
lndhub://numbers and letters:number and letters@http://10.90.87.191:3008
You already have the same account on the local network and with tailscale.
Important considerations
-Accounts with IPv4 only work and are updated when tailscale is activated.
-tailscale keys expire, so it is good to create the same account on the local network and then modify it with the new IPv4 that is generated after the previous one expires.
-The account may cease to exist and with it your sats if the node ceases to exist, an account for personal use is recommended. 
#bitcoin #node #tailscale #bluewallet
How to create a Lightning account connected to your node using Bluewallet and Tailscale.
Pre requirements
-bluewallet
-tailscale
-static address for the node
Procedure.
1) install the Bluewallet app on your node and your smart device.
2) install Tailscale on your node, it will ask you to create an account using email.
Install the application on your smart device and use the same email that you used on your node.
3) on your smart device open the Tailscale application and log in, you will see two devices connected with their own IP (your node and your cell phone, in my case), press the name of your node and your addresses will appear, IPV4, magicdns, IPV6, in addition to the expiration of your access key.
Test
We are going to copy and paste the IPV4 address into your browser, the log in of your node should appear, in my case it is umbrel.
With this we know that there is a connection with our node.
Connect tailscale to bluewallet
-on our device we open the Bluewallet application and select the 3 dots “…” in the upper right corner (settings) > Network> Lightning settings > paste the IPV4 address and add at the end: 3008 is the port that Bluewallet uses on our node.
You can also use magicdns and add the port :30008 at the end.
e.g.
Create accounts
We can now create accounts connected to our node using tailscale.
In bluewallet >press the “+” sign> lightning>create
A QR image will appear with an address at the bottom, we will use it later to create the same account but with a local network.
E.g.
lndhub://user:password@http://host:port
lndhub://numbers and letters:number and letters@http://IPV4:3008
Create the same account but on a local network
Once the account with tailscale connection is created, we can recreate the same account.
In our new Lightning account we press “…”> export/backup> copy the account
We import the existing account but we will change the host to the local umbrel host, for that we go to the “+” sign in bluewallet > lightning > import Wallet > we paste the backup of the tailscale account and modify the end with our local umbrel ip .
E.g.
lndhub://user:password@http://host:port
lndhub://numbers and letters:number and letters@http://umbrel.local:3008
lndhub://numbers and letters:number and letters@http://10.90.87.191:3008
You already have the same account on the local network and with tailscale.
Important considerations
-Accounts with IPv4 only work and are updated when tailscale is activated.
-tailscale keys expire, so it is good to create the same account on the local network and then modify it with the new IPv4 that is generated after the previous one expires.
-The account may cease to exist and with it your sats if the node ceases to exist, an account for personal use is recommended.
Como crear una cuenta Lightning conectada a tu nodo usando Bluewallet y Tailscale.
Prerequisitos
-bluewallet
-tailscale
-dirección estática para el nodo
Procedimiento.
1) instalar la aplicación Bluewallet en tu nodo y en tu dispositivo inteligente.
2) instalar Tailscale en tu nodo, te pedirá hacer una cuenta usando correo electrónico.
Instala la aplicación en tu dispositivo inteligente y usa el mismo correo que utilizaste en tu nodo.
3) en tu dispositivo inteligente abre la aplicación Tailscale y log in, veras dos dispositivos conectados con su propia IP (tu nodo y tu celular, en mi caso) , presiona el nombre de tu nodo y te aparecerá tus direcciones, IPV4, magicdns, IPV6, ademas de la expiración de tu llave de acceso.
Test
Vamos a copiar y pegar la dirección IPV4 en tu navegador, te debería de aparece el log in de tu nodo, en mi caso es umbrel.
Con esto sabemos que si existe una conexión con nuestro nodo.
Conectar tailscale a bluewallet
-en nuestro dispositivo abrimos la aplicación Bluewallet y seleccionamos los 3 puntos “…” en la esquina superior derecha (settings) > Network> Lightning settings > pegamos la dirección IPV4 y agramaos al final :3008 es el puerto que utiliza bluewallet en nuestro nodo.
También se puede usar magicdns y agregarle el puerto :30008 al final.
e.g.
Crear cuentas
Ya podemos crear cuentas conectadas a nuestro nodo usando tailscale.
En bluewallet >presionar el signo “+”> lightning>create
Te aparecerá una imagen QR con una dirección en la parte de abajo la usaremos mas adelante para hacer una cuenta igual pero con red local.
E.g.
lndhub://usuario:contraseña@http://host:puerto
lndhub://numeros y letras:numero y letras@http://IPV4:3008
Crear la misma cuenta pero en red local
Una ves creado la cuenta con conexión tailscale podemos recrear la misma cuenta.
En nuestra nueva cuenta Lightning presionamos “…”> export/backup>copiamos la cuenta
Importamos la cuenta existente pero le cambiaremos el host por el host local de umbrel, para eso nos dirigimos en bluewallet al signo “+” >lightning> import Wallet> pegamos la backup de la cuenta tailscale y modificamos el final con nuestra ip local de umbrel.
E.g
lndhub://usuario:contraseña@http://host:puerto
lndhub://numeros y letras:numero y letras@http://umbrel.local:3008
lndhub://numeros y letras:numero y letras@http://10.90.87.191:3008
Ya posees tu misma cuenta en red local y con tailscale.
Consideraciones importantes
-las cuentas con ipv4 solo sirven y se actualizan cuando tailscale esta activado.
-las llaves de tailscale caducan, por eso es bueno crear la misma cuenta en red local para luego modificarla con la nueva Ipv4 que se genere después de caducar la anterior.
-la cuenta puede dejar de existir y con ella tus sats si el nodo deja de existir, recomendable cuenta de uso personal. 
I bought a bitaxe to learn about mining, at first I connected it with public-Pool, obviously I don't expect to earn Bitcoin by mining with a bitaxe.
I found out that Braiins Pool now has Lightning payments so I decided to create a Braiins account and connect my bitaxe.
Guess who is earning 30 sats a day 🙃😎
Compré un bitaxe para aprender sobre minería, al principio lo conecté con público-Pool, obviamente no espero ganar Bitcoin minando con un bitaxe.
Me enteré que Braiins Pool ahora posee pagos Lightning así que decidí crear una cuenta en Braiins y conectar mi bitaxe.
Adivinen quien está ganando 30 sats diarios 🙃😎 
