You shouldn’t need to upgrade the firmware to see other nodes but it is probably worthwhile doing. My nodes are on 2.5.9 at the moment but that latest 2.5.11 should be fine.

Also if you are in the CBD of Adelaide it might be worthwhile taking a walk around to see if you pick anything up. I’ve found the signal seems to be blocked by buildings in some places.

You shouldn’t need to upgrade the firmware to see other nodes but it is probably worthwhile doing. My nodes are on 2.5.9 at the moment but that latest 2.5.11 should be fine.

Also if you are in the CBD of Adelaide it might be worthwhile taking a walk around to see if you pick anything up. I’ve found the signal seems to be blocked by buildings in some places.

You shouldn’t need to upgrade the firmware to see other nodes but it is probably worthwhile doing. My nodes are on 2.5.9 at the moment but that latest 2.5.11 should be fine.

Also if you are in the CBD of Adelaide it might be worthwhile taking a walk around to see if you pick anything up. I’ve found the signal seems to be blocked by buildings in some places.

This is my config on Android. I think you don’t need to set the frequency offset as setting to Australia already uses 915Mhz.

This is my config on Android. I think you don’t need to set the frequency offset as setting to Australia already uses 915Mhz.

These are the settings I have on mine (iPhone app so looks slightly different but the settings should all be the same).

These are the settings I have on mine (iPhone app so looks slightly different but the settings should all be the same).

These are the settings I have on mine (iPhone app so looks slightly different but the settings should all be the same).

These are the settings I have on mine (iPhone app so looks slightly different but the settings should all be the same).

These are the settings I have on mine (iPhone app so looks slightly different but the settings should all be the same).

These are the settings I have on mine (iPhone app so looks slightly different but the settings should all be the same).

You should just need the region set to Australia and LongFast. You might also need to change the hop limit to 5 or 6 to see all of the network. I don’t have a node with me right now but I can post some screenshots of my config later tonight when I get home.

I’m in Adelaide! As long as you are using 915Mhz and the LongFast channel you should see some other nodes! We have quite good coverage around a lot of the suburbs.

I’m in Adelaide! As long as you are using 915Mhz and the LongFast channel you should see some other nodes! We have quite good coverage around a lot of the suburbs.

I’m in Adelaide! As long as you are using 915Mhz and the LongFast channel you should see some other nodes! We have quite good coverage around a lot of the suburbs.

Growing rapidly here too. I can now see 100 nodes from my node at home. When I started playing with it a few months ago I couldn’t see any others. #meshtastic nostr:note1lf5vssx9rfxfvps5csjs3clr8meynqmy50w5nty72regvmvdy5aqlrm9a5