YEAH

youtu.be/vIDK2HZ2FgU

I DONT KNOW I DONT PLAY VIDEOGAMES

AND FOR A SHOTSHELL YOU DON'T EVEN NEED TO WORRY ABOUT THE CASE WALLS, YOU'RE JUST MAKING THE CASE HEAD PUCK

THEORETICALLY THE PRESSURE COULD BE LOW ENOUGH TO HAVE THE CASE WALLS AND CASE HEAD BE SEPARATE, LIKE A SHOTSHELL

THAT WOULD EASE THE PROCESS GREATLY

CASE WALLS COULD BE COPPER TUBING DRAWN OR PRESSED OVER A MANDREL, CASE HEAD COULD BE CAST OR MOLDED FROM EPOXY OR MOLTEN ALUMINUM OR COPPER

THEN THE TWO COULD BE PRESSED TOGETHER OR GLUED OR SOLDERED

NO IM SORRY IF I PUT YOU OFF, ITS JUST NOT REALLY VIABLE FOR THE AVERAGE MAN OR A MAKESHIFT SETUP TO MAKE STEEL 9MM CASINGS

EACH INDIVIDUAL PIECE IS TINY, ALMOST TOO TINY FOR HAND TOOLS TO BE USED EFFECTIVELY

THE METAL NEEDS TO BE UNIFORM, SEAMLESS, AND THIN ON THE CASE WALLS, AND THE CASE HEAD IS A PUCK OF MATERIAL WITH A SHAPED RIM RINGED AROUND IT AND TWO DIFFERENT DIAMETER CENTERED HOLES DRILLED INTO IT FROM BOTH ENDS -- A PRIMER POCKET AND A FLASH HOLE FOR THE PRIMER

AND THE CASE HEAD AND CASE WALLS HAVE TO BE THE SAME PART

ITS A LOT OF EFFORT AND HASSLE FOR A SMALL AND FRANKLY CONSUMABLE ITEM

I WOULD HAVE TO BECOME A TWITTER HOTTAKER ECELEB FIRST AND FOR ONE THING IM NOT AN ASHKIE JEW AND FOR ANOTHER I DONT WANT TO MAKE AN ACCOUNT ON A CSAM INSTANCE

A DOG

nostr:note1rjy0ttazqyzw8mc2vqkt4vwgma4wq32asxrlklxcjw6x4cnjhw6qneus08

AND HOW MANY ARE ON MEDS TO BE FUNCRIONAL

HOW EASILY CAN YOU MAKE STEEL CASINGS IN YOUR GARAGE

ITS NOT THE CRACK OR THE HOMELESSNESS THAT MAKES THE HOMELESS CRACKHEAD -- ITS A HOLISTIC ETHOS

ITS SLOW GOING AND INCREMENTAL UNLIKE IN MY VIDEOGAMES AND ANIMES

youtube.com/watch?v=Q0yDSoOZjeY

NO THEYRE NIGGERS

THE LAND YEARNS FOR A NEW AND BETTER BREED OF HOMELESS CRACKHEAD

TRAWLING SOLUTIONISTS AND OUTDOORSMEN, THEIR BLOGS AND SHIT, FOR HOMELESS CRACKHEAD IDEAS

I THINK ZDOOM FORUMS HAVE LOST LIKE HALF OF THE ACTIVITY, AND MOST OF THAT HALF WERE THE CREATIVES, EVER SINCE THE PEDO TROON SITUATION

AND THE HULL OF COURSE CAN JUST BE MADE OUT OF A STRIP OF PAPER WRAPPED ROUND AND ROUND WITH ELMERS GLUE, LIKE IN THE OLDEN DAYS

I THINK JUST A BLOB OF EPOXY CAST IN A PLASTER FORM, ON TOP OF A RIGHT SIZE OFF THE SHELF WASHER WOULD WORK JUST AS WELL

IF PLAIN EPOXY DOESN'T HAVE THE STRENGTH, STEEL WOOL SOAKED WITH EPOXY WILL

youtube.com/watch?v=zEWrJEfdIR0