#greenhouse #mining update
After cleaning the malfunction temp sensor and mounting the heat sink I did another test.
I am using #braiins os because I have installed to silent sensors and the #antminer #firmware thinks the fan is not working properly because they require lower frequency.
braiins os shows me temperature of the #miner for the first few minutes but after it disappears and miner is reducing #hashrate.
It shows me error messages (I posted earlier) of the temperature sensor.
I saw in some forums that antminer #firmware is showing better error logs so I assambled the old fans and started the miner with the antminer firmware.
And yes this firmware shows me there are 2 temperature sensors and one is fully working and the other one brings an error with the first read attempt.
The antminer firmware is not reducing hashrate, but rather sets fan speed to always full power.
What means I could run this #hashboard using this firmware.
Anyhow I can´t, because the noise would ran my neighbor crazy
So my options are:
1. Finding a way to use antminer firmware with the silent fans
2. Find a way in Braiins OS to act like the antminer firmware
3. Find another OS
4. Replace the malfunction chip. But here I need to find out if the sensor itself is the problem or any connected component (capacitor or resistor)
I guess I will go with option 4
Maybe #nostr has got any advice?
#asknostr #diy #project #orangery
I will be patient.
I have decided to be nostr only. I don´t know if I will stick to "nostr only" in the long run, who knows what the future brings.
But currently I am also (mainly) doing this to explore nostr and learn about it. I don´t have any interest for any other social media "project"
Which client(s) are you using?
I have a #S9 #antminer with only 1 working #hashboard.
But it also reduces #hashrate down to 200 Gigahashes after about 5 minutes running.
It comes with an error message
ERROR bosminer_hal::sensor: Sensor hb7[ii_hwmon::tmp451::TMP451]: read failed: I2C error: general error Hashchip: no response for read_register(reg=0x20) from chip One(61)
It means on Hashboard 7 (connector 7 of control board) sensor #TMP451 has a read fail.
There is a #I2C (bus) error. I am not sure what "chip One(61) really means, but I guess One means because it is the only tmp451 chip and 61 stands for the location (it is located next to Hashchip 61).
I found a few informations in different forums and on #zeusbtc.com (what is an awesome library for fixing mining hardware)
I unsolderd the #heatsink of hashchip 61 a found the senor. It looks pretty dirty (see pic) so I cleaned it an mounted the heatsink again. I will test the #miner tomorrow.
Maybe I am lucky and that was it. If not I will first try to run it with reduced power.
The (first) goal is to have at least one hashboard running stable.

If you want to see more about the #greenhouse project and/or technical details about mining hardware please #share, #react, #comment or #zap.
Nothing is constant except change.
I am not doing any electrical works in my #greenhouse.
I rather have made the rest of my garden ready for winter.
But I tried to #fix my #S9 #antminer
I show details in a second note
With this account I am using browser apps only and here I have a lot of problems.
I like noStrudel, but I get a lot of error messages.
So I mostly use nostter, but when I want to zap it just loads forever.
Currently I am copying the ID of a post from nostter to nostr.band this is redirecting me to zapper.nostrapp, where I finally can create a lightning invoice to zap via Wallet of Satoshi
I guess I forgot to login on zapper.nostrapps
Maybe I should move to mobile apps. On mobile apps I never had issues in the past
I just got my #jerky order from nostr:npub1cwhy4k8qd2guyqz8t45u4yzyp4k4fhnjn573ukh6e77mde2dgm9s2lujc5!
I am drooling. Will report on taste soon. 😁
#spendandreplace #supportnostriches 
Sometimes I don´t yet understand nostr.
My zap appears with a different npub.
Anyhow I hope you can enjoy your jerky
Actually I have a greenhouse that will be heated by an S9 Miner. But this alone is not really what I would call an orangery.
Forgot to mention your #reactions #comments and #zaps of course motivate me as well 😉
This weekend I will equip my #greenhouse with 2 additional switchable sockets and prepare cables for a #grow lights. Maybe you can recommend some grow lights or give some tips?
I also try to fix my #s9 #miner. At least one #hashboard with a malfunction temperature sensor.
If I have got some time left, I also want to post some history of my projects, myself and my motivations.
#react #comment and/or #zap for more.
#greenhouse #miner #update #project #asknostr
Hi #nostr,
you might wonder why #organgery, if I don´t even own one??
It´s my #dream and #vision and it is a #symbol for my #values.
My strategy is to identify with what I want, not just what I have.
This keeps me motivated and on track
#introduction
I forgot to mention I am starting all my projects on a very small scale. Maybe I can expand some project in the future.
Anyhow I also think small scale is very underrated.
Seems the image upload didn´t work. So I now try it with a link via nostr.build

Your are right it is really bright. TBH I didn´t expected this at first
I really love the light effects of my S9 #miner in my #greenhouse.
I build it this year and so far it is #tomatoes (and S9) only. Anyhow I will add some #grow lamp and sensors to it within the colder seasons and more different #plants next year.
I bought the s9 very chip but with a high risk that it is not working 100%. And turned out 2 of 3 #hashboards have malfunction hash chips and the other one has a problem with one temperature sensor. So I am currently working on a fix of the temperature sensor first.
So time to train my rusted #solder skills.
If you want to see more of my bitcoin greenhouse project please #share, #react, #comment or #zap.
Hi nostriches,
I want to start this journey sharing my ideas and projects searching for solutions and knowledge that might be relevant in a bitcoin world.
My current projects are heating my pool with a S19 antminer and heating my greenhouse with a S9 antminer and of course my smart home with intelligent energy flow.
Future projects will focus on nostr, lightning, bitcoin.
If you are interested in details to the projects and the progress please give me a reaction, comment or zap.
I hope I can learn a lot of this community and find some interesting people.
#introduction #tech #nostr #bitcoin #mining #smarthome #energy #gardening #research #development #dyi #growth #greenhouse #gametheory #study #learn