of course 😊
Discussion
Thank you. Been meaning to build this. Now starred.
keep me up to date!
Ordered components. Will print some cases for Prague. You be there?
no, but i would be very happy to see some pictures from prague 😁
Pan-head screws best?
Printing at 0.20mm 15% infill.
I used screws from a set like this https://www.amazon.co.uk/dp/B08RRY72VG
Would you be ok if me son builds these and sells them on his website and contributes to a dev fund? #[3]
that would be very nice!
which dev fund did you have in mind? 🙂
You might need to create one ;-) We can zap you :-)
Zaps are always welcome 🫂😁
if someone contributes, I need a more transparent solution
but feel free to report back if your son has trouble with the readme / instructions
😍
What print settings do you use? lid fit is a bit tight. 
The tollerances really look too tight … i used a .6 nozzle and no particular settings
I think I have to improve the lid
I printed at 0.2mm and 15% infill with a 0.6mm nozzle. Typically should leave 0.2 to 0.5mm tolerance - is there any tolerance in the size of the tabs in the lid?
NB It’s possible I need to print a calibration cube and check my printers accuracy.
i will upload a new .stl in a few minutes 😊
Broughts these bits with me - except I brought the wrong screen! D’oh :-( 
oh 😳😢
this one is the right one -> https://thepihut.com/products/2-9-black-white-e-ink-e-paper-display-module-for-raspberry-pi-pico-296x128