Replying to Avatar BaronRon

Don't believe me? Don't worry, neither did I so I verified my numbers.

I had those 6 miners running and I measured the wire leading to the subpanel in the garage. While in theory it could draw 59.32 amps of power it was drawing 55 amps at the exact moment this photo was taken.

FYI...that's a digital clamp meter and you can find many types on Amazon.

If you have no idea how to use one please do a little research before you go digging in your electrical panel. You need to put the clamp over a hot wire and that may require you to remove some of the safety covers from your panel. I do not recommend you do this if you're not knowledgeable about electrical panels.
Avatar
BaronRon 2y ago

The problem with a clamp meter is that it requires you to keep the panel open to get a measurement.

The good people @Sense monitor developed a way to track electrical usage from your home panel at any time from anywhere remotely.

You can see that Sense monitor unit in red with the antenna sticking up. Even though I thought about installing it myself. I paid to have an electrician install it to be safe.

After having used it for over a year I highly recommend it.

Reply to this note

Please Login to reply.

Discussion

Avatar
BaronRon 2y ago

You can track real-time data which is great to see when your house is using peak electricity.

In addition, I find the the long-term data to be very handy for when I'm doing my taxes at the end of the year (whole other topic!). For example, in the image below I know exactly how much energy my miners have consumed over the year. In this case it is 84.4% (Always On) of my current electrical bill. I can then deduct that amount against the profits from my miners which allows me to offset some of the cost of running these machines.