been trying to figure out how to set up my microphone and headphones through the mixer
> initially had sound
> 30 minutes of messing around
> i have no sound
> profit? 
Discussion
I cannot tell if you are being sarcastic (#actuallyautistic) but I was a sound guy. 😂
Is it one of these:
-group bus button
-a pan pot
-aux send turned all the way down?
it’s a zoom podtrak p4
For real if you send me a shot of your current inputs and outputs and the top of your mixer I'd be happy to troubleshoot. ❤️ Will check back in a few!
If you turn all the knobs to this and tap on the mic, and there should be visual fluctuations in the signal levels.
What do you need? Sound technician here
uhmm, so i initially had sound and the microphone working, but the audio coming in also fed into the OUT (to the mic), and after messing around to possibly fix it, I ended up with a mess 😁 
Cool one, did you manage to fix it, routing should be trivial, just plug the mic and make sure it is dynamic or condenser mic to set it properly, pull up gain, pull up monitoring gain to hear from earphones and last thing pull up master gain to have signal coming out. Hope it helps ask me whatever in case you need 🫂