Nostr Web Client

no. you need to have linux installed on your raspberry pi first. I use Debian Bookworm Lite (without a UI, just shell). then install the meshtastic stuff on top of it. Meshtastic has a web interface that will install on the pi, so you can then have a web based UI to configure the lora settings. You can see Bookworm Lite on the Raspberry Pi imager in the "Raspberry Pi OS (Other)" section:

kidwarp 1y ago

Ugh 😑

Reply to this note

Please Login to reply.

Discussion

Brian 1y ago

It is food practice on your Linux skills 🤣

kidwarp 1y ago

This is why i have an large amount of electronics just laying around…

I stopped messing with code 10+ years ago lmfao

Dr. Hax 1y ago

If you use a Pi Pico, the's very little software work:

- download a firmware image

- plug in the pi while holding down the boot selector button (it'll show up like a thumb drive)

- copy the firmware to the drive

- that's it. You now have the software installed.

Go to client.meshtastic.org and you can configure everything through any Chromium-based browser (over WebSerial). Firefox reportedly doesn't support the standard for WebSerial

Once configured, you should be good to go.

kidwarp 1y ago

Nope this is a rpi4 w/hat

I’ll figure it out sooner or later….

I’m not even sure I know what a pico is…