動いてるっぽい…気がする
(snip)
U-Boot 2023.07-rc5-ga9ad8f0fa0 (Jul 07 2023 - 19:23:13 +0900) Allwinner Technology
CPU: Allwinner H616 (SUN50I)
Model: MangoPi MQ-Quad
DRAM: 1 GiB
Core: 45 devices, 18 uclasses, devicetree: separate
WDT: Not starting watchdog@30090a0
MMC: mmc@4020000: 0
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In: serial@5000000
Out: serial@5000000
Err: serial@5000000
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
18104 bytes read in 4 ms (4.3 MiB/s)
No EFI system partition
No EFI system partition
Failed to persist EFI variables
BootOrder not defined
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efi
219050 bytes read in 12 ms (17.4 MiB/s)
Booting /efi\boot\bootaa64.efi
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 1.18
boot> boot bsd.rd
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:bsd.rd: 2858428+1077500+12724624+631888 [1705467+791232+168+26848]=0x1560490
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.3-current (RAMDISK) #56: Fri Jul 7 19:28:38 JST 2023
uaa@openbsd-current-vm.uaa.org.uk:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 1072021504 (1022MB)
avail mem = 1000779776 (954MB)
random: boothowto does not indicate good seed
mainbus0 at root: MangoPi MQ-Quad
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 1024KB 64b/line 16-way L2 cache
cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
efi0 at mainbus0: UEFI 2.10
efi0: Das U-Boot rev 0x20230700
smbios0 at efi0: SMBIOS 3.0
smbios0: vendor U-Boot version "2023.07-rc5-ga9ad8f0fa0" date 07/01/2023
smbios0: Unknown Unknown Product
"secmon" at mainbus0 not configured
"osc24M-clk" at mainbus0 not configured
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
simplebus0 at mainbus0: "soc"
sxisyscon0 at simplebus0
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 85 pins
ampintc0 at simplebus0 nirq 192, ncpu 4: "interrupt-controller"
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 2 pins
sxitwi0 at simplebus0
iic0 at sxitwi0
"x-powers,axp313a" at iic0 addr 0x36 not configured
sxidog0 at simplebus0
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
com0 at simplebus0: dw16550
com0: console
"usb" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at simplebus0: version 1.0
"rtc" at simplebus0 not configured
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio0: 32 pins
gpio9 at sxipio1: 32 pins
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
"leds" at mainbus0 not configured
"vcc5v" at mainbus0 not configured
"vcc3v3" at mainbus0 not configured
"binman" at mainbus0 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0:
sd0: 14768MB, 512 bytes/sector, 30244864 sectors
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/arm64 7.3 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?