I just built my first #seedsigner.
The whole process felt so easy and went so smooth, that I was was almost annoyed when it worked plug'n'play after maybe 7min😂
Awesome work nostr:npub17tyke9lkgxd98ruyeul6wt3pj3s9uxzgp9hxu5tsenjmweue6sqq4y3mgl !
Discussion
nostr:note17uu40dm5dqsna04xvulwjgan0mrejhqn297yj455r6utjsaz87jq5w0ugy If you haven't built a nostr:npub17tyke9lkgxd98ruyeul6wt3pj3s9uxzgp9hxu5tsenjmweue6sqq4y3mgl with your own hands are you even a bitcoiner?
Some have done our project a disservice by giving the impression that it is "too technical" for the average bitcoiner (Peter McCormack), but it really is this easy.
nostr:note17uu40dm5dqsna04xvulwjgan0mrejhqn297yj455r6utjsaz87jq5w0ugy
As an average bitcoiner, this isn’t a bad project.
The building is easy but the handling of the air-gapped signing will need some getting used to
The soldering was the only tricky techie step. There must be an easier alternative to it.
No soldering necessary!
-> just buy the #RaspberryPi Zero WH, it comes with the header.
The inductor which deactivates the DCDC-Regulator for WiFi & BT can be clipped by a sharp side cutter 😉
Oh brilliant. I didn’t know that.
Would you please be so kind as to post a link or photos identifying the component to clip?🙏🧐😃💜😆🙏
https://github.com/DesobedienteTecnologico/rpi_disable_wifi_and_bt_by_hardware
It is described in the link above.
I found it here: https://seedsigner.com/seedsigner-independent-custody-guide/
Thanks so much, Friend!
I can see which components to remove.😃
👆
Note that you can also purchase headers that "press fit" without soldering...
