動いてるっぽい…気がする
(snip)
U-Boot 2023.07-rc5-ga9ad8f0fa0 (Jul 07 2023 - 19:23:13 +0900) Allwinner Technology
CPU: Allwinner H616 (SUN50I)
Model: MangoPi MQ-Quad
DRAM: 1 GiB
Core: 45 devices, 18 uclasses, devicetree: separate
WDT: Not starting watchdog@30090a0
MMC: mmc@4020000: 0
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In: serial@5000000
Out: serial@5000000
Err: serial@5000000
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
18104 bytes read in 4 ms (4.3 MiB/s)
No EFI system partition
No EFI system partition
Failed to persist EFI variables
BootOrder not defined
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efi
219050 bytes read in 12 ms (17.4 MiB/s)
Booting /efi\boot\bootaa64.efi
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 1.18
boot> boot bsd.rd
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:bsd.rd: 2858428+1077500+12724624+631888 [1705467+791232+168+26848]=0x1560490
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.3-current (RAMDISK) #56: Fri Jul 7 19:28:38 JST 2023
uaa@openbsd-current-vm.uaa.org.uk:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 1072021504 (1022MB)
avail mem = 1000779776 (954MB)
random: boothowto does not indicate good seed
mainbus0 at root: MangoPi MQ-Quad
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 1024KB 64b/line 16-way L2 cache
cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
efi0 at mainbus0: UEFI 2.10
efi0: Das U-Boot rev 0x20230700
smbios0 at efi0: SMBIOS 3.0
smbios0: vendor U-Boot version "2023.07-rc5-ga9ad8f0fa0" date 07/01/2023
smbios0: Unknown Unknown Product
"secmon" at mainbus0 not configured
"osc24M-clk" at mainbus0 not configured
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
simplebus0 at mainbus0: "soc"
sxisyscon0 at simplebus0
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 85 pins
ampintc0 at simplebus0 nirq 192, ncpu 4: "interrupt-controller"
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 2 pins
sxitwi0 at simplebus0
iic0 at sxitwi0
"x-powers,axp313a" at iic0 addr 0x36 not configured
sxidog0 at simplebus0
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
com0 at simplebus0: dw16550
com0: console
"usb" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at simplebus0: version 1.0
"rtc" at simplebus0 not configured
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio0: 32 pins
gpio9 at sxipio1: 32 pins
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
"leds" at mainbus0 not configured
"vcc5v" at mainbus0 not configured
"vcc3v3" at mainbus0 not configured
"binman" at mainbus0 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0:
sd0: 14768MB, 512 bytes/sector, 30244864 sectors
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/arm64 7.3 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
RAMDISKカーネルなので、本当の動作確認はシステムをインストールしたmicroSDを作ってGENERIC.MPカーネルを動かしてから、という話になるんだけどね
動いてるっぽい…気がする
(snip)
U-Boot 2023.07-rc5-ga9ad8f0fa0 (Jul 07 2023 - 19:23:13 +0900) Allwinner Technology
CPU: Allwinner H616 (SUN50I)
Model: MangoPi MQ-Quad
DRAM: 1 GiB
Core: 45 devices, 18 uclasses, devicetree: separate
WDT: Not starting watchdog@30090a0
MMC: mmc@4020000: 0
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In: serial@5000000
Out: serial@5000000
Err: serial@5000000
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
18104 bytes read in 4 ms (4.3 MiB/s)
No EFI system partition
No EFI system partition
Failed to persist EFI variables
BootOrder not defined
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efi
219050 bytes read in 12 ms (17.4 MiB/s)
Booting /efi\boot\bootaa64.efi
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 1.18
boot> boot bsd.rd
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:bsd.rd: 2858428+1077500+12724624+631888 [1705467+791232+168+26848]=0x1560490
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.3-current (RAMDISK) #56: Fri Jul 7 19:28:38 JST 2023
uaa@openbsd-current-vm.uaa.org.uk:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 1072021504 (1022MB)
avail mem = 1000779776 (954MB)
random: boothowto does not indicate good seed
mainbus0 at root: MangoPi MQ-Quad
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 1024KB 64b/line 16-way L2 cache
cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
efi0 at mainbus0: UEFI 2.10
efi0: Das U-Boot rev 0x20230700
smbios0 at efi0: SMBIOS 3.0
smbios0: vendor U-Boot version "2023.07-rc5-ga9ad8f0fa0" date 07/01/2023
smbios0: Unknown Unknown Product
"secmon" at mainbus0 not configured
"osc24M-clk" at mainbus0 not configured
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
simplebus0 at mainbus0: "soc"
sxisyscon0 at simplebus0
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 85 pins
ampintc0 at simplebus0 nirq 192, ncpu 4: "interrupt-controller"
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 2 pins
sxitwi0 at simplebus0
iic0 at sxitwi0
"x-powers,axp313a" at iic0 addr 0x36 not configured
sxidog0 at simplebus0
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
com0 at simplebus0: dw16550
com0: console
"usb" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at simplebus0: version 1.0
"rtc" at simplebus0 not configured
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio0: 32 pins
gpio9 at sxipio1: 32 pins
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
"leds" at mainbus0 not configured
"vcc5v" at mainbus0 not configured
"vcc3v3" at mainbus0 not configured
"binman" at mainbus0 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0:
sd0: 14768MB, 512 bytes/sector, 30244864 sectors
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/arm64 7.3 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
ABMA PrimeのThreads特集はこれか https://www.youtube.com/watch?v=VIuA63tffuI 【アベマ同時配信中】｢Threads総力解説／大空幸星と考える自殺報道｣ 7/6(木)よる9時｜アベプラ (2023/07/06)
s/ABMA/ABEMA/
ABMA PrimeのThreads特集はこれか https://www.youtube.com/watch?v=VIuA63tffuI 【アベマ同時配信中】｢Threads総力解説／大空幸星と考える自殺報道｣ 7/6(木)よる9時｜アベプラ (2023/07/06)
相模原市緑区の住民をやっておりますけど、同じ緑区でも旧相模原市と旧城山町、旧津久井郡でかなりの違いがあります。
某市某所の某施設、確か最寄りの病院まで車で一時間…緊急時は生命の保証はできないという警告に近い内容の貼り紙があったようななかったような[要出典]
JR横浜線橋本駅北口にあるのは確かジャスコ→サティ→イオンと変化していたはず
まあ紹介できるものなら…
イオン、薬局は確か持ってたよね…あと、病院経営に直接乗り出さなくてもテナントでクリニックを入れてたりはするんだっけ。
イオンモール、意外に近くない。圏央道を走ること前提で日の出に行くか、そうでなければ座間か大和、多摩平の森？
最寄りの駅まで行けるバス、1時間に3本しかない（通勤・帰宅の時間帯はもうちょい増えるが）。
同意。賑やかすぎず過疎過ぎない、適度な場所が一番落ち着く…
田舎は病院が遠いという問題があるような。
現実的にはfail2banみたいな、学習型(?)フィルタの方が扱いやすいのかもなあ…
pf.confでタチの悪いIPアドレスをブロックするくらいのことは現状でもやってるんだけど…もう少し大雑把な単位でブロックしたいとは思っていて。AS単位のブロックが（iptablesとかその手のフィルタにとって設定が）容易ならちょっと導入してみたいかも。
確かにfail2banの類があればもう少し枕を高くして眠れるんだが…OpenBSD上で動くこの手のツールが欲しいところ（多分ある）。
U-bootのパッチはどう送れば良いんだ…ってMastodon側に放り込めって話を敢えてこっちに投げてみるテスト
押すな、って言われたらやっぱ押しますよね…
ほんと、何故なんだろう。
またおもちゃにされてる…ｗ