ได้คำตอบยัง?

บอกรักกันอีกแล้ว...

You all should look for "Slavik Kraszennikov" and what his prophecy say's about the WorldPass. (WorldCoin?)

It really scare's me 👀

Put a bounty up. Let's find a dev that wants the same :)

We can refactor the current code to reuse the mobile components in a desktop app, but somebody has to actually assemble the app.

Law of thermodynamics

The first law of thermodynamics states that heat can neither be created nor destroyed, it can only be converted from one form to another

It applies to dark matter too, like #darknostr

#chemistry #science

ว้าววว แบบนี้พี่ต้องเข้าไปฟัง ขอลิงค์ที

I'm very active here. Noting, sharing and zapping.

Yes. Increasingly the use of your own tax paid money is becoming a crime

Just confirmed with her it was Halifax

Further to that she had to take time off work as bank only open til 3. In what world is this ok

Not sure. I think she said Halifax is that one???

Kick backs from the destination to get the tourist dollar at the destination

I'm equipped with caffeine. Good morning Sir!

Yep. I find this is a very interesting phenomenon.

I’m gonna go out on a limb here. If she poked her tongue out she would fall flat on her face (well you know what I mean).

🤣

Looks like some sort of rice custard over cake topped with pomegranate

Orange Pi Zero3(4GB)で、Androidのイメージを起動させた場合のログなんだけど…

Android区画のシグネチャ(ANDROID!)を潰してもautoboot失敗→U-bootのコンソールに落ちずに止まる、というのは厳しいかも。潰し方を間違えた可能性も当然あり。

他のLinuxイメージと異なり、PhonenixCardで書き込む必要あり。

[103]BOOT0 commit : 4b34f2890a

[106]set pll start

[108]periph0 has been enabled

[111]set pll end

[115]unknow PMU

[117]unknow PMU

[120]PMU: AXP1530

[125]vaild para:1 select dram para0

[128]board init ok

[130]enable_jtag

[132]DRAM BOOT DRIVE INFO: V0.651

[135]the chip id is 0x2000

[138]chip id check OK

[149]DRAM_VCC set to 1100 mv

[151][DST] Dram DST Loop1

[176][AUTO DEBUG]32bit,2 ranks training success!

[347][DST] Lclk,0x00008888,Memtest Pass

[351][DST] Clk =792 MHz

[354][DST] R_2d

[1459][DST] R_2d_hv_D2:0x24-0x68,0x45(297mV),7

[1464][DST] R_2d_hv_D2:0x40~0x50,0x48

[1467][DST] R_2d tpr6 = 0x48808080

[1477][DST] R_1st

[1491][DST] DB0 R_1st:0,3~27,25,0x0f

[1508][DST] DB1 R_1st:0,3~29,27,0x10

[1525][DST] DB2 R_1st:0,2~27,26,0x0e

[1541][DST] DB3 R_1st:0,3~28,26,0x0f

[1545][DST] R_1st Tpr12 = 0x0f0e100f

[1548][DST] W_2st

[1593][DST] DB0 W_2st:0,26~48,23,0x25

[1641][DST] DB1 W_2st:0,26~49,24,0x25

[1689][DST] DB2 W_2st:0,26~49,24,0x25

[1738][DST] DB3 W_2st:0,26~49,24,0x25

[1742][DST] W_2st Tpr11 = 0x25252525

[1745][DST] R_2st

[1775][DST] DB0 R_2st:0,6~26,21,0x10

[1806][DST] DB1 R_2st:0,6~27,22,0x10

[1836][DST] DB2 R_2st:0,4~27,24,0x0f

[1864][DST] DB3 R_2st:0,5~27,23,0x10

[1867][DST] R_2st Tpr12 = 0x100f1010

[2018][DST] RV_C, VW:0x42-0x4e, DW:120ps

[2104][DST] Dram DST Success

[2107]DRAM CLK =792 MHZ

[2109]DRAM Type =8 (3:DDR3,4:DDR4,7:LPDDR3,8:LPDDR4)

[2121]Actual DRAM SIZE =4096 M

[2124]DRAM SIZE =4096 MBytes, para1 = 310a, para2 = 10001000, dram_tpr13 = 2006c61

[2137]DRAM simple test OK.

[2140]rtc standby flag is 0x0, super standby flag is 0x0

[2145]dram size =4096

[2149]Use rtc to store dram tuning para

[2152]card no is 0

[2154]sdcard 0 line count 4

[2157][mmc]: mmc driver ver 2021-10-12 13:56

[2161][mmc]: b mmc 0 bias 0

[2170][mmc]: Wrong media type 0x0

[2173][mmc]: ***Try SD card 0***

[2182][mmc]: HSSDR52/SDR25 4 bit

[2185][mmc]: 50000000 Hz

[2187][mmc]: 14768 MB

[2190][mmc]: ***SD/MMC 0 init OK!!!***

[2293]Loading boot-pkg Succeed(index=0).

[2297][mmc]: b mmc 0 bias 0

[2300]Entry_name = u-boot

[2309]Entry_name = monitor

[2313]Entry_name = dtbo

[2316]Entry_name = optee

[2320]Entry_name = dtb

[2323]mmc not para

[2325]Jump to second Boot.

NOTICE: BL3-1: v1.0(debug):54937d5

NOTICE: BL3-1: Built : 17:44:59, 2021-12-13

NOTICE: BL3-1 commit: 8

NOTICE: cpuidle init version V2.0

NOTICE: secure os exist

MESSAGE: [0x0] TEE-CORE: OP-TEE version: 81ab7a47 #1 2020 05 06 02:40:04 UTC arm

NOTICE: BL3-1: Preparing for EL3 exit to normal world

NOTICE: BL3-1: Next image address = 0x4a000000

NOTICE: BL3-1: Next image spsr = 0x1d3

U-Boot 2018.07 (Jul 05 2023 - 07:16:58 +0000) Allwinner Technology

[02.390]CPU: Allwinner Family

[02.393]Model: OrangePi Zero3

I2C: ready

[02.402]DRAM: 4 GiB

[02.407]Relocation Offset is: 75ecd000

[02.445]secure enable bit: 0

[02.448]smc_tee_inform_fdt failed with: ffffffff

[02.453]pmu_axp152_probe pmic_bus_read fail

[02.457]PMU: AXP1530

FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL

[02.470]CPU=1416 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=400Mhz

[02.477]gic: sec monitor mode

sunxi flash map init

SPI ALL: ready

[02.495]flash init start

[02.497]workmode = 0,storage type = 1

[02.500][mmc]: mmc driver ver uboot2018:2023-03-21 09:51:00

[02.506][mmc]: get sdc_type fail and use default host:tm1.

[02.511][mmc]: get clk_mmc_name string failed

[02.515][mmc]: get pll0 string failed

[02.518][mmc]: get pll1 string failed

[02.522][mmc]: get pll2 string failed

[02.525][mmc]: can't find node "mmc0",will add new node

[02.530][mmc]: fdt err returned

[02.534][mmc]: Using default timing para

[02.537][mmc]: SUNXI SDMMC Controller Version:0x40200

[02.555][mmc]: card_caps:0x3000000a

[02.558][mmc]: host_caps:0x3000003f

[02.562]sunxi flash init ok

get value error

[02.566]drv_disp_init

[02.570]handle_num : 7

[02.596]Item0 (Map) magic is bad

[02.599]the secure storage item0 copy0 magic is bad

[02.611]Item0 (Map) magic is bad

[02.613]the secure storage item0 copy1 magic is bad

[02.618]Item0 (Map) magic is bad

erase secure storage failed

[02.623]sunxi_secure_storage_exit err: secure storage has not been inited

fdt get node offset faill: lcd1

[02.640]handle_num : 4

of_clk_get: index is error,reset it.

[02.652]handle_num : 2

[02.657]drv_disp_init finish

[02.666]Item0 (Map) magic is bad

[02.669]the secure storage item0 copy0 magic is bad

[02.680]Item0 (Map) magic is bad

[02.683]the secure storage item0 copy1 magic is bad

[02.688]Item0 (Map) magic is bad

[02.708]Loading Environment from SUNXI_FLASH... OK

[02.719]boot_gui_init:start

** Unrecognized filesystem type **

hdmi hpd out, force open?

[02.877]set disp.fb0_rot_used fail. using defval=0

[02.882]set disp.fb0_rot_degree fail. using defval=0

[02.887]boot_gui_init:finish

[02.891]bmp_name=bootlogo.bmp size 1152056

secure storage read widevine fail

[02.951]secure storage read widevine fail with:-1

secure storage read ec_key fail

[02.958]secure storage read ec_key fail with:-1

[02.963]usb burn from boot

delay time 0

weak:otg_phy_config

[02.976]usb prepare ok

[03.146]usb sof ok

[03.148]usb probe ok

[03.150]usb setup ok

set address 0xe

set address 0xe ok

[03.556]do_burn_from_boot usb : have no handshake

List file under ULI/factory

** Unrecognized filesystem type **

[03.567]update part info

[03.576]update bootcmd

[03.579]change working_fdt 0xbbe7ce50 to 0xbbe4ac90

disable nand error: FDT_ERR_BADPATH

get value error

[03.589][mmc]: get sunxi-mmc0 string failed

[03.607]update dts

Hit any key to stop autoboot: 0

When you look at the transaction on mempool does it say it’s rbf. If it does I believe you can do it. I think it must also have a large enough change output to fund the fee increase.