nostr:npub1canhdnyarz4thu7zgzz3hv3nw0al770etgjjawqukxuw82ceuz6qmq0fm9 nostr:npub1gqn4mglfftd6292303jp2r060qwy69mpgdfprlumsuhf68wft27sxq0pj6 That looks pretty good already, whow!
Three small things I noticed:
– the height of your 3D logo is about twice the height of the original
– the letters of the original seem to leave a bit more space to the corners of the "cube" surface they are printed on
– the color for the "T" looks a bit different on my logos here (but this could be due to aging) – the precise colors for print and screen can be found at 
nostr:npub13levfmuj9uu5gy4mhh0tg5nkujqujkyky8220rd0dkwpm4p950eqss6saf nostr:npub19a8tdmlwgk7jhrwzttrqdtcfe8t27lzh90umlwmrl3xtdfvtsnwsw7lsy2 I'm also planning to build one (sorry, no extra RAM board – though I have a complete Lisa 2 here). Where did you order the boards from, I'm thinking of JLCPCB?
I also started looking for parts. The 6504 can be replaced by a 6502 in an adapter socket, the I/O code doesn't use undef'd opcodes. W65C02/W65C22N are available from Mouser. The W65C22N is bug-compatible to the original 6522 parts (the W65C22_S_ is not!). The 2148 SRAMs might be difficult to find.
nostr:npub15u0nnh3nwq509j48f2x0aa09nwje838w0dksw3yk4yc4m6s8kpdq4e7fg6 Was mir aktuell noch ein bisschen Probleme bereitet, ist die Beschaffung von passenden 4:3 LCD Panels. Ich hab in der Bucht von einem chinesischen Haendler urspruenglich 2Panels gekauft, inzwischen sind es vier, und alle sind Mist.
Entweder zerkratzt oder Pixelfehler ohne Ende oder die Ausleuchtung ist fuer die Tonne.
Von Pimoroni gibt es eines, das ist aber recht teuer (ca. 100 Euro pro Stueck).
nostr:npub1canhdnyarz4thu7zgzz3hv3nw0al770etgjjawqukxuw82ceuz6qmq0fm9 Ja, die Pimoroni-Displays sind leider teuer – ich vermute, du willst das 10" 1024x768 verwenden (es gibt ja noch das etwas günstigere 8")?
Eine Alternative wären evtl. Ersatz-LCDs für die alten iPads, die haben auch 1024 x 768 – oder 2048 x 1536 bei iPad 3/4 – und 9,7" Diagonale, sollten ein Stück günstiger sein (wohl so ab 20€ in der Bucht?) und (iPad 3 und 4 auf jeden Fall) mit eDP recht leicht anzusteuern.
https://hackaday.com/2019/07/18/put-those-ipad-displays-to-work-with-this-edp-adapter/
nostr:npub15u0nnh3nwq509j48f2x0aa09nwje838w0dksw3yk4yc4m6s8kpdq4e7fg6 Kannst du gerne machen, musst du aber nicht unbedingt. Das Manual ist schonmal super. Und es zeigt mir auch, dass ich es so nicht machen werde. 😃
Ich muss zum einen das Ganze so einfach wie moeglich halten, und immer im Hinterkopf behalten, dass es auch druckbar ist. Das ist echt ‘ne Herausforderung.
nostr:npub1canhdnyarz4thu7zgzz3hv3nw0al770etgjjawqukxuw82ceuz6qmq0fm9 Sag' einfach Bescheid, wenn du Detailfotos oder Maße brauchst... im 3D-Druck ist das sicher knifflig. Viel Erfolg!
nostr:npub15u0nnh3nwq509j48f2x0aa09nwje838w0dksw3yk4yc4m6s8kpdq4e7fg6 nostr:npub1gqn4mglfftd6292303jp2r060qwy69mpgdfprlumsuhf68wft27sxq0pj6 Oooh... das Service-Manual kannte ich noch nicht. Das ist super! Danke dir! ☺️
nostr:npub1canhdnyarz4thu7zgzz3hv3nw0al770etgjjawqukxuw82ceuz6qmq0fm9 Sonst kann ich auch gerne nächste Woche mal ein Megapixel-Display aufmachen und Fotos machen... muss eh mal einige von meinen kalibrieren.
nostr:npub1gqn4mglfftd6292303jp2r060qwy69mpgdfprlumsuhf68wft27sxq0pj6 Samma, du hast nicht zufaellig Bock das Gehause des MegaPixel Display aufzumachen? 😁
nostr:npub1canhdnyarz4thu7zgzz3hv3nw0al770etgjjawqukxuw82ceuz6qmq0fm9 nostr:npub1gqn4mglfftd6292303jp2r060qwy69mpgdfprlumsuhf68wft27sxq0pj6 Das normale N4000A Mono Mexapixel-Display? Da hilft evtl. schon das Factory Manual: http://www.nextcomputers.org/NeXTfiles/Docs/Hardware/Schematics/NeXT4000MonitorFactoryManual/