#grownostr #hosebib #repair Hi all, since I’m an idiot with irrigation… can someone link to the specific pieces to replace this hose bib? 3/4” pvc pipe, I’m not sure what threads for the elbow, or the correct hose bib… do you use pipe tape on the threaded connection or something else? 
Discussion
https://www.homedepot.com/p/Everbilt-3-4-in-MIP-Brass-No-Kink-Hose-Bibb-Valve-102-304EB/205821746
Then you will need primer and glue if you need to replace pvc 90.
Get pipe dope instead of tape can't put it on wrong. If you use teflon tape make sure you put it on counter clock wise. Not a plumber all info could be wrong.
For the 90 you need a 3/4" slip on one side and 3/4" FPT/FIP on the other. Don't forget primer and glue. The valve is what nostr:npub1p4r3wutla9j8hu4fx6zpj6jfuhkm9k39r2pux5769qmln9362t8s0fnvnp linked. It'll be 3/4" MPT/MIP
What you have there is so common that any little hardware store will know exactly what you need. I'd find an Ace, True Value, or mom and pop place. It'll be worth paying a little more to talk to an actual human being. If you have to go to Blowes or the Home Despot, try to get someone to help you out. If they act confused at all, get someone else.