Hey #asknostr, I could use some advice. The water coming out of my well is high pH, 9+.

I've started putting some pH ⬇️ into the water for seedlings and indoor plants to get the pH between 6-7.

Any recommendations for treating the water from the well for outdoor gardens and the entire house?

Also wondering if someone has any info on drinking higher pH water every day? Perhaps nostr:nprofile1qqstzt0wugc7sklvr8e7fcl7ukyn63ym3ns4nmf2mnk0vqnz4l9x65qpp4mhxue69uhkummn9ekx7mqpr4mhxue69uhkummnw3ezumtfv3jxc6twvuhx67tydeeju6nsqythwumn8ghj7mn0wd68ytn5dacx2arg9e5kuen0te28kw?

Reply to this note

Please Login to reply.

Discussion

Do you not have a water filtration system hooked up to the well?

When was last time you standardized meter? They can be finicky. Has it always been this high?

It is calibrated. I think this is the first time I tested it myself. We've had it lab tested but I don't think I ever saw the pH.

We do. It is only UV and particle filter at this point though.

You might need a neutralizing filter or soda ash injector

Are you filtering with carbon already?

That part of the filtration system is broken. You reckon it will drop it considerably?

No I don't think so, but I think you need to have your filtration system working first before considering PH.

Changing PH of water isn't some panacea IMHO.

It won't hurt you.

yeah it's usually caused by calcium hydroxide/carbonate

Reach out to your local Kinetico dealer, of you have one. I have a Kinetico water softener system that came with my house. It's robust and simple, all mechanical. I have only had minor maintenance issues over the past 13 years. Mine does not include the pH neutralizing capability, but I know that it is an available option.

I misspoke. I do have the pH neutralizer. The white tank on the left is full of calcite which raises my pH. Then it goes through the sediment filter into the softener in the center. The large tank on the right holds the salt. I add about 15 lbs of calcite per year, clean the filter annually and add 30 lbs of salt per month.

Thanks man. I appreciate the info.

I’m assuming your ph meter is calibrated and working properly.

People buy alkaline water generators and swear by them for improving their health. Although most alkaline water generator manufacturers recommend a slightly lower ph than what you are reading for optimal health. I noticed that Dr. Ken replied to your note and said it was ok. Ken literally wrote the book on nutrition and health. If he says it’s ok I believe him.

What’s your total hardness? When you adjust the ph, let the water sit for a few hours and check the ph again. If it goes back up you have so many dissolved minerals in your water that it’s buffering any ph adjuster you are adding to the water and it’s impossible to overcome chemically. At that point the only option I know of is a reverse osmosis filter. This will remove a lot of the dissolved solids, stop some of the chemical reactions going on and lower the ph. It will also make your water more adjustable.

For a garden solution try a rainwater capture system. Not just gutter diverters and barrels. Think about swails, micro-swails and biochar. Even planting in furrow valleys where the mounds are oriented to provide shade to the soil throughout the day will increase water retention significantly.

Thank you. The tester is calibrated. I haven't tested the hardness, but our water feels very soft.

I've been working on water capture, but may need to take it up a notch.

back in 2003 i got into some chemistry and had a pH meter and the water of Brisbane, Australia was typically around 9

easiest way to make the soil ok with this pH is to just add carbon to it, you can use any form, sugar, molasses, charcoal, or even coal

bacteria use the carbon and form chelating complexes that buffer the salts