Not immutable though

⚡⚡⚡

#[0]

I sat my pants ⚡

#MarchOffTwitter

21,000sats to #marchofftwitter forever ⚡

Print an exhaust shroud for that bad boy

https://cults3d.com/en/3d-model/various/whatsminer-m3x-exhaust-shroud-for-ac-infinity-cloudline-t8

Honestly, if your looking to move over to corporate IT, I'd just look at A+ to get your foot in the door at a tier1/helpdesk type position. If your aspirations are greater than that jump right to the MSCE track afterwards and see if your employer offers and continued education subsidy. Sometimes they have training credits with their MS license renewals you could use.

I've taken them. Good starting point for a career change if that's the direction you want to go.

Plebminers rejoice! This is an exhaust shroud for Whatsminer M3x series miners that allows for the capture and redirection of exhaust heat from the hashboards and the power supply. Requires removal of the fan. It is designed to output directly into an AC Infinity Cloudline T8 sitting on the same surface as the mining chassis. The output duct has been designed to slip inside of the T8's intake so as to be printable on medium sized print beds.

https://cults3d.com/en/3d-model/various/whatsminer-m3x-exhaust-shroud-for-ac-infinity-cloudline-t8

If you can't get a gun, get some self defense training. It can help foster the same mindset and confidence that carrying a firearm would.

A lot of the attacker/victim relationship can be boiled down to very instinctive and primal behavior. Predators naturally seek prey. Don't look like easy prey. That confidence you get from carrying a gun? That's outwardly perceivable to would be attackers. Being alert and aware of your surroundings, making eye contact, and how you carry yourself are all analyzed by the primitive parts of our brain and subconsciously feed to the executive function.

All that being said, stay strapped or get clapped.

Everyday brother

This will let you connect your Bitmain S9 to a standard 6" flexible duct and move the heat where you want it. The duct is offset so that the mining chassis can still sit on a flat surface. It is designed to replace one of the fans. Depending on application, shorter screws may be needed or you may damage hashboards

https://cults3d.com/en/3d-model/various/bitmain-antminer-s9-flexible-duct-adapter

The Mandibles is a prescient read for any bitcoiner. Shriver is a bitcoiner, she just doesn't know it yet.

#[0]

I ran a covert mining operation at a corporate data center that I managed years ago. I don't regret it because things ended badly unrelated to the mining years later.

Going to start publishing mining related STL files of various things I've designed over the years. On Cults3d, but for free. Do with them what you will.

https://cults3d.com/en/3d-model/various/bitmain-antminer-s19-flexible-duct-adapter

I can't see out of my second story windows ❄❄❄

I was in the same boat, couldn't find much information on running for efficiency so glad this was helpful. Trying to minimize noise right now, but my gut tells me peak efficiency is going to be in the 2100-2200w range. Once I swap fans and get some ducting going I'm going to lean on the power a bit more and find out.

Promising results with used S19 95T. Nothing done except upgraded to BraiinsOS. Going to design and print some 140mm fan adapters for Noctua A14's and I think its going to be close to game time for space heater 2.0. Looking forward to the upgrade from S9's heating the house.

This rip is straight 🔥

Thank you #[1] for making this happen with Lionel Shriver finally!

Mandibles Mandibles Mandibles

#[0]