Nostr Web Client

Hey, we have a threshold of 5 persons if they are followed then the view will be removed normally. we have default relays if you dont have any relays but it should be only your relays. You can use the relays feed if you want also its a good option 🙏

Garbage nsec 4mo ago

Got it thanks nostr:nprofile1qyw8wumn8ghj7mn0wd68ytfsxyh8jcttd95x7mnwv5hxxmmdqyw8wumn8ghj7mn0wd68ytfsxgh8jcttd95x7mnwv5hxxmmdqqs2jwlflvpwgmzqga4gfatfwhd4sd0latv33lajh5pzjpyed5lacrq7dn4fx Also the Yakihonne web app seems to not be properly reading from my test relay when set to the relay feed (just that one relay). Only surfaces a few notes, or sometimes no notes at all, or sometimes none then a few if you refresh.

For the Yakihonne Android and iOS apps, they both find all the notes on the relay (same settings).

Also the mobile apps surface replies in the relay feed, whereas the web app seems to surface just the notes. Is the web app maybe a little behind for the relay feeds?

Reply to this note

Please Login to reply.

Discussion

Garbage nsec 4mo ago

Also on the web this does not save for me, when you add a new relay, or delete the utxo relay, and then hit update, it stays with the popup open. And when you close the popup out and re-open it the setting is as before. (Works on mobile though).

REDKAZ⚡️| YakiHonne 4mo ago

We will further investigate the issue thanks joe, a nostr even should be sent when u hit the update button 🤔 can u try with a fresh created account created from yakihonne just to double check if it is an extension issue or something else. nostr:npub16vjln603hfsfhremp627jle4ycm6p23grjjqrm04rrdwupldyfnsjx88a2 nostr:npub19qcnj6qzrhv92pf8tuhd74wcl6c8r2y2mmrp5pknfy3m2lsrd7xs6y7xw2

Garbage nsec 4mo ago

I tried with a fresh account, same thing. On the desktop side it does not actually send the event (even though the UI shows the spinner), and the listed relays remain the same. On mobile it works fine, you can add and remove relays and the change will be reflected on desktop.

REDKAZ⚡️| YakiHonne 4mo ago

We checked it from our side it seems totally not sure whats happening from your end did you try another browser ?

Moos 4mo ago

Can you record a video if possible to investigate more, I could not reproduce the issue, by also using your current account and a freshly created one, appreciate the help 🙏

Garbage nsec 4mo ago

Sure, here's the behaviour I get. The event seems to go through (haven't checked the relay logs yet) but nothing changes in the desktop UI for that popup afterwards. I've set a single nostream relay for both read and write for the test, and removed all other relays.

https://blossom.primal.net/fd5efd90c4516f42745b2360273faede8a389ce0b2520dd1ab2369b9d1e4f505.mov

REDKAZ⚡️| YakiHonne 4mo ago

Thanks Joe, this is only on web right ? On mobile its working fine?

Garbage nsec 4mo ago

Yup, mobile it's fine with the same nostream relay for read and write.

I'm testing other relay software types on desktop and it seems strfry works on desktop, so many it's limited to nostream on desktop (nostream on mobile is good).

REDKAZ⚡️| YakiHonne 4mo ago

perhaps its the AUTH event challenge that needs to be exchanged between the clients and relays but it shouldnt br a problem?

REDKAZ⚡️| YakiHonne 4mo ago

nostr:npub19qcnj6qzrhv92pf8tuhd74wcl6c8r2y2mmrp5pknfy3m2lsrd7xs6y7xw2 can we debug with a nostream relay specifically and see how it goes ?

Garbage nsec 4mo ago

Also doesn't seem to work with rnostr (desktop). With strfry and khartru it does work (desktop).

REDKAZ⚡️| YakiHonne 4mo ago

Khartru is strfry based i think

REDKAZ⚡️| YakiHonne 4mo ago

you can check our relay it is based on strfry wss://nostr-01.yakihonne.com or wss://nostr-02.yakihonne.com if it works with strfry it means there is something with the nostream implementation nostr:npub1qqqqqqyz0la2jjl752yv8h7wgs3v098mh9nztd4nr6gynaef6uqqt0n47m can we take a look at this from your end if you have time?

Garbage nsec 4mo ago

Just tested and it works on desktop with the yakihonne strfry relay (all other relays removed)

The odd thing is the nostream relay works fine for mobile, also all other relays removed. I guess something to do with nostream and desktop specifically?

REDKAZ⚡️| YakiHonne 4mo ago

yeah maybe we will see from our end and the relay maintainer to see how it goes

Garbage nsec 4mo ago

Great thanks, appreciate it guys!

REDKAZ⚡️| YakiHonne 4mo ago

We appreciate the effort too Joe we will let u know about any feedbacks from ourside 🙏

Sedd 4mo ago

I will check on my side.

REDKAZ⚡️| YakiHonne 4mo ago

algo.utxo is not a normal relay it is based on threshold settings you can open https://algo.utxo.one to check them out or just use other relays to browse different feeds

Moos 4mo ago

Hey, what kind of signer are you using? If you signed using an extension, make sure to approve the message popped out from the extension window, if you’re using a remote buncker, make sure as well to approve all permissions and sometimes signing needs to be approved manually where your buncker is located.

Moos 4mo ago

Can you share the URL of the relay so we can test it out?