Avatar
ScarcityFightClub
63b9af6f2285b7103c8c1c69e90628b8ef3fe014628205281a4551917ebb1ca8
Replying to Avatar Rusty

my bad

Typos on Nostr don't bother me but I'm an aviation nerd so had to correct it. Thanks for all the EMF posts - just ordered a Safe and Sound EMF meter and will be checking out how to improve my setup at home.

Replying to Avatar Rusty

Airplanes are PEAK TOXIC environment.

Below readings were taken by Eric Windheim while flying on Boeing 747 MAX8 using an oscilloscope plugged into the airplane's power socket.

Look at the massive levels of Dirty Electricity (high-frequency voltage transients) riding on the aircraft’s power system, with harmonics reaching beyond 90 KHz

This isn’t just MINOR ELECTRICAL NOISE.

The waveforms show intense modulation patterns, likely caused by switch-mode power supplies (SMPS), Inverters, LED lighting & onboard WiFi systems.

All this in ADDITION to EMFs from RADAR, avionics, in-flight Wi-Fi, Bluetooth, passenger devices.

No wonder people feel so drained after flying.

But the problem goes deeper than just the readings.

What makes this reading even more concerning is the physical environment of the aircraft itself.

An airplane is essentially a hollow aluminum tube, a conductive enclosure.

In Physics, this acts as a Faraday Cage. It blocks signals from getting in, but it also traps signals inside.

With 200+ people using cellphones & Bluetooth, plus the plane's industrial WiFi, the radiation has nowhere to go. It just bounces off the walls and zaps you from every angle.

Another thing most people don't realize that aircraft electrical systems don't run on the standard 50/60Hz grid we use on the ground.

They run on 400 Hz to save weight on parts.

This higher frequency baseline is already more biologically active than ground current. Add in those dirty spikes from the readings above and you have a chaotic electrical soup.

So If you plug your laptop or cellphone into the seat, you are physically connecting yourself to that Dirty electricity.

You have been warned.

https://blossom.primal.net/18a864004e2699c9e739cdc7e4ef03ada0757a52e57ee2a7eb21de1d707bd452.mp4

737*

Fighting was the best decision I ever made, but it's risky. I trained for 2 years before I started fighting (in my 30s). Especially for boxing, IMO you need to spend a lot of time getting defense to become 2nd nature or your first fight is going to be like rockem' sockem' robots. Good luck sir.

I had closed my business checking account years ago but had kept the cards until recently. I couldn't log in with my VPN on easily, so I closed them both because fuck them.

What nostr:nprofile1qqsd0svn8yy3c6y2qgrws85pwsewhnxpnc04ahpwwu76kvckcjmrutcppemhxue69uhkummn9ekx7mp0qy2hwumn8ghj7un9d3shjtnyv9kh2uewd9hj7qghwaehxw309aex2mrp0yhxummnw3ezucnpdejz79yt2sv is building reminds me of the setup that House Atreides runs in Dune. When family atomics?

This movie gave me a fear of lobsters for months.

Replying to Avatar West Major

The new Desert Chore Coat is live. First one we’re making is in Brown Canvas. This is 100% cotton. Fabric is milled in the U.S.A. (which is super rare) and one of the last mills that still makes heavier woven fabric.

It’s got big pockets and antique brass snaps and rivets.

We’re taking a different approach with this garment.

My long term dream is to have our own western wear factory. It’s extremely difficult, expensive and high risk. Many that attempt this fail. But it’s possible. There are brands doing it. And I have to try.

This garment is the first step in that journey. We’re going to make them here in Arizona. I’m going to sew as many as I can - and I’ve found a local seamstress that’s going to help me.

It’s a mix of feeling very excited, and also wanting to throw up - as we’re going to have to problem solve and figure out a lot of things along the way (things that can only be figured out through doing it).

The mfg of these will be very manual, time intensive. We don’t have the best machines yet. We don’t have an automatic cutting table. My kick press is broken. The lady that’s printing out our pattern just told me this morning her printer isn’t working.

But there’s only one way to figure it out. And we will. And then we’ll improve everything one coat at a time, until we have a well oiled machine and make the best chore coats in the west.

These will be made to order.

Expect to get yours 3 weeks from your purchase date.

As a thank you - and for your patience - we’re selling them at a slight discount right now.

Sizing - I recommend sticking with your shirt size. They’re slightly bigger than our shirts - designed to be worn over a couple layers. So if you wear a medium, go medium.

Good luck! Interested to see where they'll be priced.

Been to 2 stadium events the past month, and nobody has been on bitchat yet.

I'm tasked with finding a dog food brand to feed my puppy. Any advice?

Honestly I kinda like that take in a simple-is-good type of way

Replying to Avatar waxwing

https://materialbitcoin.com/en/

It's funny because when, 8 or 9 years ago I saw them using cards with private keys in paralelni polis, I laughed at it.

Seriously though, wtf is wrong with people?

I personally am excited to receive all Bitcoin on-chain transactions to the same convenient address 🙄

Is shitposting just posting shit or is it posting while shitting?

Have been looking at these - seem practical or is it uncomfortable to use?